Treated Wood For Raised Garden Beds

222 views

Treated Wood For Raised Garden Beds


Treated Wood For Raised Garden Beds - When vegetables that are growing in raised garden beds utilizing the Square Foot Gardening approach, your beds will need to be sectioned off into one-foot segments called planting squares. Each planting square comes with an address used to spot the square.

While for addressing the methods vary, among the simplest is to make use of letters for amounts and columns for rows, along with the square is identified by the mix of the two. Numbering starts in the upper left corner and moves left to right, top to bottom. For instance, planting square A1 is the upper left-hand square (1st column, 1st row), while planting square C4 is the square in the 3rd column and also the 4th row. I've yet to find a garden bed that is commercially accessible with an included feature for marking planting squares off.


I wish somebody would develop a Square Foot Gardening grid which you can fit into a garden bed that is raised to mark off squares, but until that is accessible, in case you would like to use the Square Foot Gardening approach, you will need to formulate your own personal strategy for marking squares off. Step one would be to calculate the dimensions on the interior of the garden bed, which is the length and width which is in fact usable for planting.

The 4x8 foot garden beds I purchased, for instance, are 4x8 feet from end to end. But when you connect the boards in the corners, you lose a few inches, therefore the interior dimensions of the garden bed are really a couple of inches short of the advertised size. In my own instance, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these dimensions as Useable Span for the remainder of this short article.