Garden Swing Bed Canopy


Garden Swing Bed Canopy

Garden Swing Bed Canopy - When vegetables that are growing in raised garden beds utilizing the Square Foot Gardening approach, your beds will have to be sectioned off into one-foot sections called planting squares. A 4x4 foot garden bed, for instance, will have 16 planting squares (because there are 16 square feet in a 4x4 bed). A 4x8 foot garden bed will have 32 planting squares. Each planting square comes with an address used to identify the square.

While for addressing the methods change, among the simplest is to make use of letters for amounts and columns for rows, as well as the square is identified by the mix of the two. Numbering starts in the upper left corner and moves left to right, top to bottom. I've yet to locate a garden bed that is commercially available with an enclosed feature for marking planting squares off.

I wish somebody would build a Square Foot Gardening grid which you can add into a raised garden bed to mark off squares, but until that is available, if you want to use the Square Foot Gardening process, for marking off squares, you'll need to devise your own strategy. Step one would be to figure out the measurements on the inside of the garden bed, which can be the length and width that is really useable for planting.

However , when you connect the boards in the corners, you lose a number of inches, hence the interior measurements of the garden bed are actually a few inches short of the advertised size. Within my case, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these measurements as Usable Span for the remainder of this short article.