Square Foot Gardening Raised Bed Plans - When vegetables that are growing in raised garden beds utilizing the Square Foot Gardening method, your beds should be sectioned off into one-foot segments called putting squares. Each putting square comes with an address used to recognize the square.
While the means of addressing vary, among the most straightforward would be to use letters for columns and amounts for rows, as well as the square is identified by the mix of the two. Numbering beginnings in the upper left corner and goes left to right, top to bottom. For example, putting square A1 is the upper left hand square (1st column, 1st row), while putting square C4 is the square in the 3rd column and also the 4th row. I have yet to locate a garden bed that is commercially accessible for marking off putting squares with an enclosed feature.
I wish somebody would build a Square Foot Gardening grid which you can insert into a garden bed that is raised to mark off squares, in case you'd like to make use of the Square Foot Gardening process but until that is accessible, for marking off squares you will need to formulate your own personal system. The first step is to figure out the dimensions on the interior of the garden bed, which can be width and the length that's truly useable for planting.
The 4x8 foot garden beds I bought, for example, are 4x8 feet from end to end. But when you connect the planks at the corners, you lose a number of inches, or so the interior dimensions of the garden bed are actually a few inches short of the advertised size. Within my instance, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these dimensions as Useable Span for the remainder of this post.