Tiered Stone Garden Beds - When growing vegetables in raised garden beds using the Square Foot Gardening approach, your beds will need to be sectioned off into one-foot segments called planting squares. Each planting square comes with an address used to spot the square.
While for addressing the methods vary, among the simplest would be to use letters for numbers and columns for rows, along with the square is identified by the mixture of the two. Numbering beginnings in the upper left corner and goes left to right, top to bottom. As an example, planting square A1 is the upper left hand square (1st column, 1st row), while planting square C4 is the square in the 3rd column as well as the 4th row. I have yet to locate a commercially accessible garden bed for marking planting squares off with an included feature.
I wish somebody would build a Square Foot Gardening grid which you can add into a raised garden bed to mark off squares, should you intend to work with the Square Foot Gardening approach but until that is accessible, for marking off squares you will need to formulate your own system. The very first step will be to figure out the dimensions on the interior of the garden bed, that is width and the length that is actually usable for planting.
But when you join the planks at the corners, you lose several inches, therefore the interior dimensions of the garden bed are actually a couple of inches short of the advertised size. Within my case, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these dimensions as Usable Length for the balance of the informative article.