Easy Garden Bed Construction


Easy Garden Bed Construction

Easy Garden Bed Construction - When vegetables that are growing in raised garden beds utilizing the Square Foot Gardening approach, your beds will have to be sectioned off into one-foot segments called planting squares. Each planting square has an address used to recognize the square.

While the options for addressing vary, one of the simplest is to utilize letters for columns and amounts for rows, and also the mixture of the two identifies the square. Numbering beginnings in the upper left corner and goes left to right, top to bottom. As an example, planting square A1 is the upper left-hand square (1st column, 1st row), while planting square C4 is the square in the 3rd column as well as the 4th row. I've yet to locate a commercially accessible garden bed for marking planting squares off with an enclosed feature.

I wish somebody would develop a Square Foot Gardening grid which you can add into a garden bed that is raised to mark off squares, in case you'd like to make use of the Square Foot Gardening approach, but until this really is accessible, for marking squares off, you'll need to formulate your own method. Step one will be to calculate the measurements on the interior of the garden bed, which can be the length and width that is really useable for planting.

The 4x8 foot garden beds I purchased, for instance, are 4x8 feet from end to end. However , when you join the planks in the corners, you lose a number of inches, hence the interior measurements of the garden bed are actually a couple of inches short of the advertised size. In my instance, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these measurements as Useable Length for the balance of the post.