Cedar Garden Bed Plans


Cedar Garden Bed Plans

Cedar Garden Bed Plans - When growing vegetables in raised garden beds utilizing the Square Foot Gardening approach, your beds will need to be sectioned off into one-foot segments called putting squares. A 4x4 foot garden bed, for example, will have 16 planting squares (because there are 16 square feet in a 4x4 bed). Each putting square comes with an address used to spot the square.

While the means of addressing vary, among the simplest is to use letters for amounts and columns for rows, as well as the square is identified by the mix of the two. Numbering starts in the upper left corner and moves left to right, top to bottom. I have yet to find a commercially accessible garden bed for marking off putting squares, with an included attribute.

I wish somebody would develop a Square Foot Gardening grid which you can add into a garden bed that is raised to mark off squares, should you would like to utilize the Square Foot Gardening approach, but until that is accessible, for marking off squares, you'll need to formulate your own method. The initial step is to compute the measurements on the inside of the garden bed, which can be width and the length that is actually usable for planting.

The 4x8 foot garden beds I bought, for example, are 4x8 feet from end to end. But when you join the planks at the corners, you lose a number of inches, or so the interior measurements of the garden bed are actually a few inches short of the advertised size. Inside my case, my beds have an interior dimension of 46.25 inches x 94 inches. I refer to these measurements as Useable Span for the remainder of this article.