Calculate Bark Mulch Coverage For Garden Beds - When vegetables that are growing in raised garden beds using the Square Foot Gardening method, your beds should be sectioned off into one-foot segments called putting squares. Each putting square comes with an address used to spot the square.
While the options for addressing change, among the simplest would be to make use of letters for columns and numbers for rows, and also the square is identified by the mix of the two. Numbering beginnings in the upper left corner and proceeds left to right, top to bottom. I've yet to find a garden bed that is commercially available for marking off putting squares, with an included attribute.
I wish somebody would build a Square Foot Gardening grid that you can fit into a raised garden bed to mark off squares, in case you want to use the Square Foot Gardening method, but until this is available, for marking off squares, you will need to formulate your own personal procedure. The very first step would be to compute the dimensions on the inside of the garden bed, which is width and the length that's really usable for planting.
The 4x8 foot garden beds I bought, for example, are 4x8 feet from end to end. However , when you connect the boards at the corners, you lose a number of inches, therefore the interior dimensions of the garden bed are actually a couple of inches short of the advertised size. In my case, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these dimensions as Usable Span for the balance of the particular article.