Vertical Garden Bed Plans

109 views

Vertical Garden Bed Plans


Vertical Garden Bed Plans - When vegetables that are growing in raised garden beds utilizing the Square Foot Gardening approach, your beds will need to be sectioned off into one-foot sections called putting squares. A 4x4 foot garden bed, for example, will have 16 planting squares (because there are 16 square feet in a 4x4 bed). Each putting square comes with an address used to identify the square.

Among the most straightforward is to utilize letters for amounts and columns for rows while for addressing the methods change, along with the mixture of the two identifies the square. Numbering beginnings in the upper left corner and proceeds left to right, top to bottom. I've yet to find a commercially available garden bed for marking putting squares off with an enclosed attribute.


I wish somebody would create a Square Foot Gardening grid which you can fit into a raised garden bed to mark off squares, should you'd like to utilize the Square Foot Gardening method but until that is available, for marking off squares, you will need to formulate your own method. The very first step will be to calculate the measurements on the inside of the garden bed, which can be the length and width which is in fact useable for planting.

But when you connect the boards in the corners, you lose a number of inches, or so the interior measurements of the garden bed are really a few inches short of the advertised size. Inside my case, my beds have an interior dimension of 46.25 inches x 94 inches. I refer to these measurements as Useable Length for the rest of this informative article.