Composite Decking Raised Garden Bed - When growing vegetables in raised garden beds using the Square Foot Gardening method, your beds will have to be sectioned off into one-foot sections called planting squares. A 4x4 foot garden bed, for instance, will have 16 planting squares (because there are 16 square feet in a 4x4 bed). Each planting square comes with an address used to spot the square.
One of the simplest is to utilize letters for numbers and columns for rows while the methods for addressing change, as well as the combination of the two identifies the square. Numbering beginnings in the upper left corner and goes left to right, top to bottom. For instance, planting square A1 is the upper left hand square (1st column, 1st row), while planting square C4 is the square in the 3rd column and also the 4th row. I have yet to locate a commercially accessible garden bed for marking off planting squares with an enclosed attribute.
I wish somebody would build a Square Foot Gardening grid that you can fit into a raised garden bed to mark off squares, in case you would like to utilize the Square Foot Gardening approach, but until this really is accessible, you will need to formulate your own personal system for marking off squares. The first step would be to calculate the dimensions on the inside of the garden bed, which is width and the length which is really usable for planting.
The 4x8 foot garden beds I purchased, for instance, are 4x8 feet from end to end. However , when you connect the planks in the corners, you lose several inches, hence the interior dimensions of the garden bed are really a few inches short of the advertised size. In my own case, my beds have an interior dimension of 46.25 inches x 94 inches. I refer to these dimensions as Useable Span for the rest of this informative article.