Garden Bed Design Rules

123 views

Garden Bed Design Rules


Garden Bed Design Rules - When vegetables that are growing in raised garden beds using the Square Foot Gardening approach, your beds should be sectioned off into one-foot sections called planting squares. Each planting square comes with an address used to identify the square.

One of the simplest would be to make use of letters for amounts and columns for rows while for addressing the methods vary, as well as the combination of the two identifies the square. Numbering starts in the upper left corner and moves left to right, top to bottom. I've yet to locate a commercially accessible garden bed for marking off planting squares with an enclosed feature.


I wish somebody would create a Square Foot Gardening grid that you can fit into a raised garden bed to mark off squares, in case you would like to use the Square Foot Gardening approach, but until this really is accessible, for marking off squares you'll need to devise your own personal method. The first step would be to compute the measurements on the inside of the garden bed, which will be the length and width that's actually usable for planting.

However , when you connect the boards at the corners, you lose several inches, therefore the interior measurements of the garden bed are really a few inches short of the advertised size. In my case, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these measurements as Useable Length for the rest of this post.