Square Foot Gardening Raised Bed Garden Kit - When vegetables that are growing in raised garden beds using the Square Foot Gardening method, your beds will have to be sectioned off into one-foot segments called putting squares. A 4x4 foot garden bed, for example, will have 16 planting squares (because there are 16 square feet in a 4x4 bed). Each putting square has an address used to identify the square.
Among the most straightforward would be to use letters for amounts and columns for rows while for addressing the methods vary, along with the mixture of the two identifies the square. Numbering beginnings in the upper left corner and goes left to right, top to bottom. For example, putting square A1 is the upper left-hand square (1st column, 1st row), while putting square C4 is the square in the 3rd column as well as the 4th row. I have yet to find a commercially accessible garden bed for marking putting squares off with an enclosed attribute.
I wish somebody would create a Square Foot Gardening grid which you can add into a raised garden bed to mark off squares, should you'd like to make use of the Square Foot Gardening approach, but until this is accessible, you will need to formulate your own procedure for marking squares off. The first step would be to figure out the measurements on the inside of the garden bed, which will be width and the length that's really usable for planting.
The 4x8 foot garden beds I bought, for example, are 4x8 feet from end to end. However , when you connect the planks at the corners, you lose several inches, hence the interior measurements of the garden bed are really a couple of inches short of the advertised size. In my instance, my beds have an interior measurement of 46.25 inches x 94 inches. I refer to these measurements as Useable Length for the remainder of the particular article.